Coaster Map

Iron Menace

Dorney Park · Allentown, Pennsylvania

Height requirement: 48 in (122 cm), maximum 78 in (198 cm); top speed 64 mph; 160 ft tall; 4 inversions; opened 2024.

Iron Menace is a steel sit-down roller coaster at Dorney Park in Allentown, Pennsylvania, built by Bolliger & Mabillard. It opened on 10 May 2024. The ride stands 160 ft tall, drops 152 ft, reaches 64 mph and runs 2,169 ft of track. It turns riders upside down 4 times. Its steepest drop is 95°, past vertical.

What riding Iron Menace is like

Iron Menace pairs a 160 ft structure with 2,169 ft of track, a classic proportion that gives a clear first drop and a full layout after it. The steepest drop is 95°, past vertical, so riders tip slightly beyond straight down. It goes upside down 4 times across 2,169 ft of track, so inversions are spaced out between other elements.

Opened in 2024, it is the newest of the 8 coasters we list at Dorney Park.

Its 48 in minimum is the lowest of any coaster at Dorney Park (tied with 3 others), which makes it a natural first coaster there. Among extreme-class coasters on Coaster Map the median ride-alone minimum is about 51 in (130 cm), so this rule is lower than is typical for its class.

Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.

Iron Menace layout, trains and ride system

To gain height it uses a chain lift hill.

RCDB lists 5 track elements for Iron Menace, shown here in the order RCDB lists them:

  1. Chain Lift Hill
  2. Immelmann
  3. Zero-G Roll
  4. Inclined Loop
  5. Corkscrew

Iron Menace trains and ride system

Trains2 trains with 3 cars per train. Riders are arranged 7 across in a single row for a total of 21 riders per train.
Riders per train21

Kid-height check: it appears on our 48-inch list and every taller list (54 in) as a ride-alone coaster.

Elsewhere, Bolliger & Mabillard also built Nitro (Imagicaa), Dr. Diabolical's Cliffhanger (Six Flags Fiesta Texas), Wrath of Rakshasa (Six Flags Great America) and Krake (Heide Park). See all Bolliger & Mabillard coasters.

From the RCDB entry for Iron Menace; elements are RCDB's list, not a ride-by-ride account.

Iron Menace stats

Minimum height48 in (122 cm)
Maximum height78 in (198 cm)
Park thrill rating5 of 5
Height160 ft
Drop152 ft
Top speed64 mph
Track length2,169 ft
Inversions4
Steepest drop angle95°
Ride time1:30
Opened10 May 2024
ManufacturerBolliger & Mabillard
ModelDive Coaster / Custom Narrow
TypeSteel, Sit Down, Extreme

How intense is it?

Intense (extreme)

RCDB classes it as an extreme coaster; Dorney Park rates it 5 out of 5 on its own thrill scale.

Who is it for?

It suits confident thrill seekers who are comfortable with big forces and riders happy to go upside down 4 times. Riders must be at least 48 in (122 cm) tall, and no taller than 78 in (198 cm).

Best seat to ride

The back rows get pulled over each hill at speed, which gives the sharpest drops and most airtime; the front row trades some of that for a clear view of the track ahead.

General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.

How Iron Menace compares

On our intensity ranking Iron Menace is number 1 of 8 at Dorney Park, where 1 is the most intense. It is the 3rd tallest of the park's 8 coasters with a listed height.

If it sounds like too much, the next gentler coaster here is Hydra the Revenge (95 ft tall, 53 mph, 7 inversions; 54 in minimum).

Measured against every coaster on Coaster Map with a listed figure, Iron Menace is taller than 90% and faster than 87% of them.

If you liked Iron Menace, try

Similar rides elsewhere on Coaster Map, matched on type, class, builder, size and inversions (the first is the nearest good match within about 700 km, where there is one):

  • Valkyria at Liseberg: the same Bolliger & Mabillard Dive Coaster / Custom Narrow model; same extreme class; 154.2 ft tall, 65.2 mph, 3 inversions; 132 cm minimum
  • Emperor at SeaWorld San Diego: the same Bolliger & Mabillard Dive Coaster / Custom Narrow model; same extreme class; 153 ft tall, 60 mph, 3 inversions; 52 in minimum
  • Wrath of Rakshasa at Six Flags Great America: the same Bolliger & Mabillard Dive Coaster / Custom Narrow model; same extreme class; 180 ft tall, 67 mph, 5 inversions; 48 in minimum

Before you ride Iron Menace

  • Measure first: the ride-alone minimum is 48 in (122 cm). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
  • Tall riders: the maximum is 78 in (198 cm). See can you be too tall?
  • Secure glasses, phones and loose items before the 4 inversions; the park posts its loose-article rules at the ride.
  • Opening times and ride status: check the Dorney Park app or official site on the day.

Planning for a child? The ride height checker shows every coaster they can ride at Dorney Park.

Keep reading

Frequently asked questions

What is the height requirement for Iron Menace?

Riders must be at least 48 in (122 cm) tall to ride Iron Menace. The maximum rider height is 78 in (198 cm), according to Dorney Park, official ride page (checked 10 Nov 2026). Requirements can change, so confirm at the ride entrance.

How tall is Iron Menace?

Iron Menace is 160 ft tall, with a drop of 152 ft, according to RCDB.

How fast does Iron Menace go?

Its top speed is 64 mph (103 km/h), according to RCDB.

Does Iron Menace go upside down?

Yes. It has 4 inversions.

Is Iron Menace scary?

It depends on the rider, but on intensity: RCDB classes it as an extreme coaster; Dorney Park rates it 5 out of 5 on its own thrill scale. That is RCDB's most intense class.

When did Iron Menace open?

Iron Menace opened on 10 May 2024.

Who built Iron Menace?

Iron Menace was manufactured by Bolliger & Mabillard.

How long is the ride on Iron Menace?

RCDB lists a ride time of 1 minute 30 seconds over 2,169 ft of track.

How does Iron Menace get up its first hill?

RCDB lists a chain lift hill; it has no launch.

How many people ride Iron Menace at once?

RCDB's train details give 21 seats per train.

Is Iron Menace good for first-time riders?

On the numbers: RCDB classes it as extreme; it goes upside down 4 times; it tops out at 64 mph; the minimum height is 48 in. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.

More coasters at Dorney Park

Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.

See the full Dorney Park coaster guide and map

Related guides

Sources

Last checked 10 Nov 2026. Found an error? Tell us.

New coaster alerts

Get a short email when we add a park or a new coaster opens. No spam; unsubscribe anytime.