Coaster Map

River King Mine Train

Mid America Adventure · Eureka, Missouri

Height requirement: 48 in (122 cm); top speed 37 mph; 32 ft tall; 0 inversions; opened 1971.

River King Mine Train is a steel sit-down roller coaster at Mid America Adventure in Eureka, Missouri, built by Arrow Dynamics. It first opened in Jun 1971 and was previously known as River King Run-Away Mine Train and later Rail Blazer. The ride stands 32 ft tall, drops 41 ft, reaches 37 mph and runs 2,500 ft of track. It is a hybrid coaster, mixing wooden and steel construction. It does not turn riders upside down.

What riding River King Mine Train is like

With 2,500 ft of track for a 32 ft structure, River King Mine Train is a long, low-slung ride: most of the time is spent carving through turns and small hills rather than on one big plunge. Its 41 ft drop is longer than its 32 ft height, which means the first drop falls below the level where it starts, into a trench, tunnel or down a hillside.

Opened in 1971, it is the oldest of the 10 coasters we list at Mid America Adventure. It has run under other names (River King Run-Away Mine Train, then Rail Blazer), so older guides and photos may use those. It is one of 15 rides on Coaster Map built to Arrow Dynamics's Mine Train design, and the 4th of them to open. Others include Cedar Creek Mine Ride at Cedar Point, Gold Rusher at Magic Mountain, Adventure Express at Kings Island and Trailblazer at Hersheypark. Height rules for this model differ by park: Mid America Adventure sets 48 in, while Hersheypark sets 36 in, Six Flags Great Adventure sets 44 in and PortAventura Park sets 140 cm.

A rider who just meets its 48 in minimum can also ride 7 other coasters at Mid America Adventure, out of 9 with verified rules. Among thrill-class coasters on Coaster Map the median ride-alone minimum is about 48 in (122 cm), so this rule is about typical for its class.

Going by RCDB's map positions, River King Mine Train sits on the east side of Mid America Adventure's coaster line-up. The nearest other coaster is Ninja, roughly 60 m away (48 in minimum), so the two are easy to ride back to back. Next closest is Boomerang at about 140 m. Distances are straight-line estimates from map coordinates, not walking routes.

Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.

River King Mine Train layout, trains and ride system

The ride begins with a chain lift hill.

RCDB lists 4 track elements for River King Mine Train, shown here in the order RCDB lists them:

  1. Chain Lift Hill ×3
  2. Tunnel

River King Mine Train trains and ride system

Trains5 cars per train. Riders are arranged 2 across in 3 rows for a total of 30 riders per train.
Riders per train30

On kid height: it appears on our 48-inch list and every taller list (54 in) as a ride-alone coaster.

Elsewhere, Arrow Dynamics also built Psycho Mouse (California's Great America), Corkscrew (Silverwood), Excalibur (Valleyfair) and Ninja (Magic Mountain). See all Arrow Dynamics coasters.

From the RCDB entry for River King Mine Train; elements are RCDB's list, not a ride-by-ride account.

River King Mine Train stats

Minimum height48 in (122 cm)
Park thrill rating4 of 5
Height32 ft
Drop41 ft
Top speed37 mph
Track length2,500 ft
Inversions0
Ride time3:00
OpenedJun 1971
ManufacturerArrow Dynamics
ModelMine Train
TypeSteel, Sit Down, Thrill, Hybrid

How intense is it?

Moderate (thrill)

RCDB classes it as a thrill coaster; Mid America Adventure rates it 4 out of 5 on its own thrill scale.

Who is it for?

It suits riders who enjoy speed and turns but may not want the biggest drops in the park and riders who prefer not to go upside down. Riders must be at least 48 in (122 cm) tall.

Best seat to ride

For the strongest airtime, sit near the back: the cars ahead pull the back of the train over each crest faster, so you leave your seat sooner on the drops. For the best view of what is coming, sit in the front row.

General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.

How River King Mine Train compares

On our intensity ranking River King Mine Train is number 8 of 10 at Mid America Adventure, where 1 is the most intense. It is the 10th tallest of the park's 10 coasters with a listed height.

If it sounds like too much, the next gentler coaster here is Pandemonium (48 ft tall, 31 mph, no inversions; 47 in minimum). Ready for more? The next step up is American Thunder (82 ft tall, 48 mph, no inversions; 48 in minimum).

Measured against every coaster on Coaster Map with a listed figure, River King Mine Train is taller than 15% and faster than 33% of them.

If you liked River King Mine Train, try

The closest matches at other parks on Coaster Map, by type, class, builder, height, speed and inversions, with one pick within about 700 km where there is one:

Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.

Before you ride River King Mine Train

  • Measure first: the ride-alone minimum is 48 in (122 cm). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
  • Loose items, health warnings and accessibility rules are set by the park and posted at the ride.
  • Opening times and ride status: check the Mid America Adventure app or official site on the day.

Planning for a child? The ride height checker shows every coaster they can ride at Mid America Adventure.

Keep reading

Frequently asked questions

What is the height requirement for River King Mine Train?

Riders must be at least 48 in (122 cm) tall to ride River King Mine Train, according to Mid America Adventure, official ride page (checked 10 Nov 2026). Requirements can change, so confirm at the ride entrance.

How tall is River King Mine Train?

River King Mine Train is 32 ft tall, with a drop of 41 ft, according to RCDB.

How fast does River King Mine Train go?

Its top speed is 37 mph (60 km/h), according to RCDB.

Does River King Mine Train go upside down?

No. It has no inversions.

Is River King Mine Train scary?

It depends on the rider, but on intensity: RCDB classes it as a thrill coaster; Mid America Adventure rates it 4 out of 5 on its own thrill scale. Expect a lively ride that stops short of the most extreme coasters.

When did River King Mine Train open?

River King Mine Train opened in Jun 1971 (previously known as River King Run-Away Mine Train and later Rail Blazer).

Who built River King Mine Train?

River King Mine Train was manufactured by Arrow Dynamics.

How long is the ride on River King Mine Train?

RCDB lists a ride time of 3 minutes over 2,500 ft of track.

How does River King Mine Train get up its first hill?

RCDB lists a chain lift hill; it has no launch.

How many people ride River King Mine Train at once?

Up to 30 per train, going by RCDB's train layout.

Is River King Mine Train good for first-time riders?

On the numbers: RCDB classes it as thrill; it has no inversions; it tops out at 37 mph; the minimum height is 48 in. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.

Is River King Mine Train at Mid America Adventure the same as Runaway Mine Train at Six Flags Over Texas?

Both are Arrow Dynamics Mine Train coasters on RCDB; the Mid America Adventure ride opened in 1971 and the Six Flags Over Texas ride in 1966; both list a 48 in minimum; RCDB lists heights of 32 ft and 35 ft.

More coasters at Mid America Adventure

Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.

See the full Mid America Adventure coaster guide and map

Related guides

Sources

Last checked 10 Nov 2026. Found an error? Tell us.

New coaster alerts

Get a short email when we add a park or a new coaster opens. No spam; unsubscribe anytime.