Marble Madness
Pleasurewood Hills · Lowestoft, England
Height requirement: 125 cm (about 49.2 in); top speed 28 mph; 49.3 ft tall; 0 inversions; opened 2014.
Marble Madness is a steel sit-down roller coaster at Pleasurewood Hills in Lowestoft, England, built by Maurer Rides GmbH. It opened on 27 Jun 2014. The ride stands 49.3 ft tall, reaches 28 mph and runs 1213.9 ft of track. It does not turn riders upside down.
What riding Marble Madness is like
At 49.3 ft tall with 1,213.9 ft of track, Marble Madness balances height and length: a main drop followed by a full circuit of hills and turns.
Opened in 2014, it is the 3rd oldest of the 5 coasters we list at Pleasurewood Hills. It is one of 5 rides on Coaster Map built to Maurer Rides GmbH's Wild Maus Classic / Right design, and the 4th of them to open. Others include Gotham City Gauntlet Escape from Arkham Asylum at Six Flags New England, Wild Mouse at Dorney Park, Marsh Mayhem at Wild Adventures and Käpt'n Jack's Wilde Maus at Eifelpark. Height rules for this model differ by park: Pleasurewood Hills sets 125 cm, while Six Flags New England sets 54 in, Dorney Park sets 48 in and Wild Adventures sets 50 in.
Its 125 cm minimum is the lowest of any coaster at Pleasurewood Hills (tied with 1 other), which makes it a natural first coaster there. Among thrill-class coasters on Coaster Map the median ride-alone minimum is about 48 in (122 cm), so this rule is higher than is typical for its class.
Going by RCDB's map positions, Marble Madness sits on the east side of Pleasurewood Hills' coaster line-up. The nearest other coaster is Wipeout, roughly 310 m away (130 cm minimum). Next closest is Egg-Spress at about 480 m. Distances are straight-line estimates from map coordinates, not walking routes.
Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.
Marble Madness layout, trains and ride system
The ride begins with a chain lift hill.
RCDB lists one element for Marble Madness:
Marble Madness trains and ride system
| Hourly capacity (RCDB) | 900 riders per hour |
|---|---|
| Designer | Ing.-Büro Stengel GmbH |
| Previous locations | Flamingo Land (as Wild Mouse) |
Marble Madness has been relocated: RCDB records it operating at Flamingo Land as Wild Mouse before Pleasurewood Hills.
On kid height: it appears on our 54-inch list as a ride-alone coaster.
Other Maurer Rides GmbH coasters on Coaster Map: Whirlwind (Seabreeze), Rattlesnake (Chessington), Spider (Lagoon) and Steel Dragon (Waldameer).
From the RCDB entry for Marble Madness; elements are RCDB's list, not a ride-by-ride account.
Marble Madness stats
| Minimum height | 125 cm (about 49.2 in) |
|---|---|
| Height | 49.3 ft |
| Top speed | 28 mph |
| Track length | 1213.9 ft |
| Inversions | 0 |
| Steepest drop angle | 46° |
| Ride time | 1:10 |
| Opened | 27 Jun 2014 |
| Manufacturer | Maurer Rides GmbH |
| Model | Wild Maus Classic / Right |
| Type | Steel, Sit Down, Thrill, Wild Mouse |
How intense is it?
Moderate (thrill)
RCDB classes it as a thrill coaster.
Who is it for?
It suits riders who enjoy speed and turns but may not want the biggest drops in the park and riders who prefer not to go upside down. Riders must be at least 125 cm (about 49.2 in) tall.
Best seat to ride
For the strongest airtime, sit near the back: the cars ahead pull the back of the train over each crest faster, so you leave your seat sooner on the drops. For the best view of what is coming, sit in the front row.
General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.
How Marble Madness compares
On our intensity ranking Marble Madness is number 2 of 5 at Pleasurewood Hills, where 1 is the most intense. It is the 2nd tallest of the park's 3 coasters with a listed height.
If it sounds like too much, the next gentler coaster here is Barnyard Whirl (no inversions). Ready for more? The next step up is Wipeout (116.5 ft tall, 47 mph, 3 inversions, 5.2 g; 130 cm minimum).
Measured against every coaster on Coaster Map with a listed figure, Marble Madness is taller than 29% and faster than 16% of them.
If you liked Marble Madness, try
Similar rides elsewhere on Coaster Map, matched on type, class, builder, size and inversions (the first is the nearest good match within about 700 km, where there is one):
- Rattlesnake at Chessington World of Adventures: also built by Maurer Rides GmbH; same thrill class; 49.3 ft tall, 28 mph, no inversions; 140 cm minimum
- Kopermijn at Drievliet: also built by Maurer Rides GmbH; same thrill class; 49.3 ft tall, 28 mph, no inversions; 130 cm minimum
- Crazy Mine at Hansa-Park: also built by Maurer Rides GmbH; same thrill class; 49.3 ft tall, 28 mph, no inversions
Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.
Before you ride Marble Madness
- Measure first: the ride-alone minimum is 125 cm (about 49.2 in). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
- Loose items, health warnings and accessibility rules are set by the park and posted at the ride.
- Opening times and ride status: check the Pleasurewood Hills app or official site on the day.
Planning for a child? The ride height checker shows every coaster they can ride at Pleasurewood Hills.
Frequently asked questions
What is the height requirement for Marble Madness?
Riders must be at least 125 cm (about 49.2 in) tall to ride Marble Madness, according to Pleasurewood Hills, official ride page (checked 11 Nov 2026). Requirements can change, so confirm at the ride entrance.
How tall is Marble Madness?
Marble Madness is 49.3 ft tall, according to RCDB.
How fast does Marble Madness go?
Its top speed is 28 mph (45 km/h), according to RCDB.
Does Marble Madness go upside down?
No. It has no inversions.
Is Marble Madness scary?
It depends on the rider, but on intensity: RCDB classes it as a thrill coaster. Expect a lively ride that stops short of the most extreme coasters.
When did Marble Madness open?
Marble Madness opened on 27 Jun 2014.
Who built Marble Madness?
Marble Madness was manufactured by Maurer Rides GmbH.
How long is the ride on Marble Madness?
RCDB lists a ride time of 1 minute 10 seconds over 1213.9 ft of track.
How does Marble Madness get up its first hill?
RCDB lists a chain lift hill; it has no launch.
Is Marble Madness good for first-time riders?
On the numbers: RCDB classes it as thrill; it has no inversions; it tops out at 28 mph; the minimum height is 125 cm. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.
Where did Marble Madness operate before?
RCDB records it at Flamingo Land (as Wild Mouse).
Is Marble Madness at Pleasurewood Hills the same as Wild Mouse at Dorney Park?
Both are Maurer Rides GmbH Wild Maus Classic / Right coasters on RCDB; the Pleasurewood Hills ride opened in 2014 and the Dorney Park ride in 2000; Pleasurewood Hills sets 125 cm and Dorney Park sets 48 in.
More coasters at Pleasurewood Hills
Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.
- Egg-Spress (125 cm; 90 cm with a companion)
- Wipeout (130 cm)
- Barnyard Whirl
- Family Coaster
Sources
- RCDB entry for Marble Madness: stats, opening date, manufacturer, type and map position.
- Pleasurewood Hills, official ride page: height requirement (checked 11 Nov 2026).
- Pleasurewood Hills official site: hours, closures and current ride rules.
Last checked 11 Nov 2026. Found an error? Tell us.