Coaster Map

Batman The Ride

Six Flags Over Texas · Arlington, Texas

Height requirement: 54 in (137 cm); top speed 50 mph; 105 ft tall; 5 inversions; opened 1999.

Batman The Ride is a steel inverted roller coaster at Six Flags Over Texas in Arlington, Texas, built by Bolliger & Mabillard. It opened on 26 May 1999. The ride stands 105 ft tall, reaches 50 mph and runs 2,700 ft of track. On an inverted coaster the seats hang below the track, so riders' feet dangle free with nothing beneath them. It turns riders upside down 5 times.

What riding Batman The Ride is like

Batman The Ride pairs a 105 ft structure with 2,700 ft of track, a classic proportion that gives a clear first drop and a full layout after it. It goes upside down 5 times across 2,700 ft of track, so inversions are spaced out between other elements. RCDB lists a peak force of 4 g, level with the 4 g median for coasters on Coaster Map with a g-force figure.

Opened in 1999, it is the 6th oldest of the 13 coasters we list at Six Flags Over Texas. It is one of 11 rides on Coaster Map built to Bolliger & Mabillard's Inverted Coaster / Batman design, and the 8th of them to open. Others include Batman The Ride at Magic Mountain, Batman The Ride at Six Flags Great Adventure, Batman The Ride at Six Flags Great America and Batman The Ride at Six Flags Over Georgia. Height rules for this model differ by park: Six Flags Over Texas sets 54 in, while Parque Warner sets 132 cm and Himeji Central Park sets 140 cm.

Its 54 in minimum is the strictest at Six Flags Over Texas, shared with 1 other coaster. Among extreme-class coasters on Coaster Map the median ride-alone minimum is about 51 in (130 cm), so this rule is higher than is typical for its class.

Going by RCDB's map positions, Batman The Ride sits on the north-east side of Six Flags Over Texas' coaster line-up. The nearest other coaster is The Joker, roughly 130 m away (48 in minimum), so the two are easy to ride back to back. Next closest is Mr. Freeze at about 130 m. Distances are straight-line estimates from map coordinates, not walking routes.

Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.

Batman The Ride layout, trains and ride system

Trains climb a chain lift hill.

These are the 6 elements RCDB records on Batman The Ride's track, in RCDB's order:

  1. Chain Lift Hill
  2. Loop
  3. Zero-G Roll
  4. Loop
  5. Wing Over ×2

Batman The Ride trains and ride system

Trains2 trains with 8 cars per train. Riders are arranged 4 across in a single row for a total of 32 riders per train.
Riders per train32
Hourly capacity (RCDB)1,400 riders per hour
DesignerIng.-Büro Stengel GmbH

Kid-height check: it appears on our 54-inch list as a ride-alone coaster.

Elsewhere, Bolliger & Mabillard also built Batman: The Dark Knight (Six Flags New England), The Monster (Walygator), Nemesis Inferno (Thorpe Park) and Raptor (Cedar Point). See all Bolliger & Mabillard coasters.

From the RCDB entry for Batman The Ride; elements are RCDB's list, not a ride-by-ride account.

Batman The Ride stats

Minimum height54 in (137 cm)
Park thrill rating5 of 5
Height105 ft
Top speed50 mph
Track length2,700 ft
Inversions5
Max g-force4
Ride time2:00
Opened26 May 1999
ManufacturerBolliger & Mabillard
ModelInverted Coaster / Batman
TypeSteel, Inverted, Extreme

How intense is it?

Intense (extreme)

RCDB classes it as an extreme coaster; Six Flags Over Texas rates it 5 out of 5 on its own thrill scale.

Who is it for?

It suits confident thrill seekers who are comfortable with big forces and riders happy to go upside down 5 times. Riders must be at least 54 in (137 cm) tall.

Best seat to ride

Choose an outside seat for the most open feeling and the front row for a clear view; the back row feels the drops hardest because the train pulls it over the top at speed.

General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.

How Batman The Ride compares

On our intensity ranking Batman The Ride is number 4 of 13 at Six Flags Over Texas, where 1 is the most intense. It is the 7th tallest of the park's 13 coasters with a listed height.

If it sounds like too much, the next gentler coaster here is New Texas Giant (153 ft tall, 65 mph, no inversions; 48 in minimum). Ready for more? The next step up is Mr. Freeze (218 ft tall, 70 mph, 1 inversion; 54 in minimum).

Site-wide, Batman The Ride is taller than 67% and faster than 62% of the 1486 coasters we cover that have a listed figure.

If you liked Batman The Ride, try

Similar rides elsewhere on Coaster Map, matched on type, class, builder, size and inversions (the first is the nearest good match within about 700 km, where there is one):

Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.

Before you ride Batman The Ride

  • Measure first: the ride-alone minimum is 54 in (137 cm). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
  • Secure glasses, phones and loose items before the 5 inversions; the park posts its loose-article rules at the ride.
  • Opening times and ride status: check the Six Flags Over Texas app or official site on the day.

Planning for a child? The ride height checker shows every coaster they can ride at Six Flags Over Texas.

Keep reading

Frequently asked questions

What is the height requirement for Batman The Ride?

Riders must be at least 54 in (137 cm) tall to ride Batman The Ride, according to Six Flags Over Texas, official ride page (checked 16 Nov 2026). Requirements can change, so confirm at the ride entrance.

How tall is Batman The Ride?

Batman The Ride is 105 ft tall, according to RCDB.

How fast does Batman The Ride go?

Its top speed is 50 mph (80 km/h), according to RCDB.

Does Batman The Ride go upside down?

Yes. It has 5 inversions.

Is Batman The Ride scary?

It depends on the rider, but on intensity: RCDB classes it as an extreme coaster; Six Flags Over Texas rates it 5 out of 5 on its own thrill scale. That is RCDB's most intense class.

When did Batman The Ride open?

Batman The Ride opened on 26 May 1999.

Who built Batman The Ride?

Batman The Ride was manufactured by Bolliger & Mabillard.

How long is the ride on Batman The Ride?

RCDB lists a ride time of 2 minutes over 2,700 ft of track.

How does Batman The Ride get up its first hill?

RCDB lists a chain lift hill; it has no launch.

How many people ride Batman The Ride at once?

Each train carries 32 riders, according to RCDB. RCDB lists an hourly capacity of about 1,400 riders.

Is Batman The Ride good for first-time riders?

On the numbers: RCDB classes it as extreme; it goes upside down 5 times; it tops out at 50 mph; the minimum height is 54 in. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.

Is Batman The Ride at Six Flags Over Texas the same as Batman The Ride at Six Flags Great America?

Both are Bolliger & Mabillard Inverted Coaster / Batman coasters on RCDB; the Six Flags Over Texas ride opened in 1999 and the Six Flags Great America ride in 1992; both list a 54 in minimum; RCDB lists heights of 105 ft and 100 ft.

More coasters at Six Flags Over Texas

Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.

See the full Six Flags Over Texas coaster guide and map

Related guides

Sources

Last checked 16 Nov 2026. Found an error? Tell us.

New coaster alerts

Get a short email when we add a park or a new coaster opens. No spam; unsubscribe anytime.