Coaster Map

Fēnix

Toverland · Sevenum, Netherlands

Height requirement: 132 cm (about 52 in), maximum 195 cm (about 76.8 in); top speed 59 mph; 131.3 ft tall; 3 inversions; opened 2018.

Fēnix is a steel wing roller coaster at Toverland in Sevenum, Netherlands, built by Bolliger & Mabillard. It opened on 7 Jul 2018. The ride stands 131.3 ft tall, reaches 59 mph and runs 2667.3 ft of track. On a wing coaster the seats stick out on either side of the track, so the outer riders have nothing above or below them. It turns riders upside down 3 times.

What riding Fēnix is like

Fēnix pairs a 131.3 ft structure with 2,667.3 ft of track, a classic proportion that gives a clear first drop and a full layout after it. It goes upside down 3 times across 2,667.3 ft of track, so inversions are spaced out between other elements. RCDB lists a peak force of 5 g, above the 4 g median for coasters on Coaster Map with a g-force figure.

Opened in 2018, it is the newest of the 5 coasters we list at Toverland.

A rider who just meets its 132 cm minimum can also ride 3 other coasters at Toverland, out of 4 with verified rules. Among extreme-class coasters on Coaster Map the median ride-alone minimum is about 51 in (130 cm), so this rule is higher than is typical for its class.

Going by RCDB's map positions, Fēnix sits on the north side of Toverland's coaster line-up. The nearest other coaster is Dwervelwind, roughly 190 m away (120 cm minimum), so the two are easy to ride back to back. Next closest is Booster Bike at about 280 m. Distances are straight-line estimates from map coordinates, not walking routes.

Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.

Fēnix layout, trains and ride system

Trains climb a chain lift hill.

RCDB lists 6 track elements for Fēnix, shown here in the order RCDB lists them:

  1. Dark/Show Section
  2. Chain Lift Hill
  3. Dive Drop
  4. Immelmann
  5. Helix
  6. Zero-G Roll

Fēnix trains and ride system

Trains2 trains with 6 cars per train. Riders are arranged 4 across in a single row for a total of 24 riders per train.
Riders per train24
Hourly capacity (RCDB)1,000 riders per hour

For families checking heights: it appears on our 54-inch list as a ride-alone coaster.

More rides from Bolliger & Mabillard at other parks we cover: Monster (Gröna Lund), Flug der Dämonen (Heide Park), Valkyria (Liseberg) and The Swarm (Thorpe Park). See all Bolliger & Mabillard coasters.

From the RCDB entry for Fēnix; elements are RCDB's list, not a ride-by-ride account.

Fēnix stats

Minimum height132 cm (about 52 in)
Maximum height195 cm (about 76.8 in)
Height131.3 ft
Top speed59 mph
Track length2667.3 ft
Inversions3
Max g-force5
Ride time1:45
Opened7 Jul 2018
ManufacturerBolliger & Mabillard
ModelWing Coaster / Custom
TypeSteel, Wing, Extreme

How intense is it?

Intense (extreme)

RCDB classes it as an extreme coaster.

Who is it for?

It suits confident thrill seekers who are comfortable with big forces and riders happy to go upside down 3 times. Riders must be at least 132 cm (about 52 in) tall, and no taller than 195 cm (about 76.8 in).

Best seat to ride

On this style of coaster, the front row has nothing in your line of sight, and the outermost seats feel the most exposed. Riders after the strongest drops pick the back row, which is pulled over each crest faster.

General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.

How Fēnix compares

On our intensity ranking Fēnix is number 1 of 5 at Toverland, where 1 is the most intense. It is the tallest of the park's 5 coasters with a listed height.

If it sounds like too much, the next gentler coaster here is Troy (104.5 ft tall, 54 mph, no inversions, 2.4 g; 120 cm minimum).

Across all 1486 coasters on Coaster Map, Fēnix is taller than 83% and faster than 79% of those with a listed figure.

If you liked Fēnix, try

The closest matches at other parks on Coaster Map, by type, class, builder, height, speed and inversions, with one pick within about 700 km where there is one:

  • The Swarm at Thorpe Park: the same Bolliger & Mabillard Wing Coaster / Custom model; also wing; 127 ft tall, 59 mph, 4 inversions, 4.5 g; 140 cm minimum
  • Raptor at Gardaland: the same Bolliger & Mabillard Wing Coaster / Custom model; also wing; 108.3 ft tall, 55.9 mph, 3 inversions; 140 cm minimum
  • Rapterra at Kings Dominion: the same Bolliger & Mabillard Wing Coaster / Custom model; also wing; 145 ft tall, 65 mph, 3 inversions; 48 in minimum

Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.

Before you ride Fēnix

  • Measure first: the ride-alone minimum is 132 cm (about 52 in). Height is checked at the entrance, so ask the ride team before you queue if your child is close.
  • Tall riders: the maximum is 195 cm (about 76.8 in). See can you be too tall?
  • Secure glasses, phones and loose items before the 3 inversions; the park posts its loose-article rules at the ride.
  • Opening times and ride status: check the Toverland app or official site on the day.

Planning for a child? The ride height checker shows every coaster they can ride at Toverland.

Keep reading

Frequently asked questions

What is the height requirement for Fēnix?

Riders must be at least 132 cm (about 52 in) tall to ride Fēnix. The maximum rider height is 195 cm (about 76.8 in), according to Toverland, official ride page (checked 10 Nov 2026). Requirements can change, so confirm at the ride entrance.

How tall is Fēnix?

Fēnix is 131.3 ft tall, according to RCDB.

How fast does Fēnix go?

Its top speed is 59 mph (95 km/h), according to RCDB.

Does Fēnix go upside down?

Yes. It has 3 inversions.

Is Fēnix scary?

It depends on the rider, but on intensity: RCDB classes it as an extreme coaster. That is RCDB's most intense class.

When did Fēnix open?

Fēnix opened on 7 Jul 2018.

Who built Fēnix?

Fēnix was manufactured by Bolliger & Mabillard.

How long is the ride on Fēnix?

RCDB lists a ride time of 1 minute 45 seconds over 2667.3 ft of track.

How does Fēnix get up its first hill?

RCDB lists a chain lift hill; it has no launch.

How many people ride Fēnix at once?

RCDB's train details give 24 seats per train. RCDB lists an hourly capacity of about 1,000 riders.

Is Fēnix good for first-time riders?

On the numbers: RCDB classes it as extreme; it goes upside down 3 times; it tops out at 59 mph; the minimum height is 132 cm. Most first-timers start with a family-class ride with no inversions, so this is better as a step up than a first coaster.

More coasters at Toverland

Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.

See the full Toverland coaster guide and map

Related guides

Sources

Last checked 10 Nov 2026. Found an error? Tell us.

New coaster alerts

Get a short email when we add a park or a new coaster opens. No spam; unsubscribe anytime.