Coaster Map

K3 Roller Skater

Plopsaland De Panne · Adinkerke-De Panne, Belgium

Height requirement: 120 cm (about 47.2 in), or 90 to 120 cm (about 35.4 to 47.2 in) with a companion; top speed 28.5 mph; 42.7 ft tall; 0 inversions; opened 1991.

K3 Roller Skater is a steel sit-down roller coaster at Plopsaland De Panne in Adinkerke-De Panne, Belgium, built by Vekoma. It first opened in 1991 and was previously known as Rollerskater. The ride stands 42.7 ft tall, reaches 28.5 mph and runs 1099.1 ft of track. It does not turn riders upside down.

What riding K3 Roller Skater is like

K3 Roller Skater pairs a 42.7 ft structure with 1,099.1 ft of track, a classic proportion that gives a clear first drop and a full layout after it.

Opened in 1991, it is the 2nd oldest of the 6 coasters we list at Plopsaland De Panne. It has run under other names (Rollerskater), so older guides and photos may use those. It is one of 16 rides on Coaster Map built to Vekoma's Junior Coaster / 335m design, and the first of them to open. Others include Woodstock Express at Cedar Point, Flight of the Hippogriff at Islands of Adventure, Flight of the Hippogriff at Universal Studios Japan and The Dragon at Legoland Florida. Height rules for this model differ by park: Plopsaland De Panne sets 120 cm, while Cedar Point sets 48 in, Islands of Adventure sets 36 in and Universal Studios Japan sets 122 cm.

Its 120 cm minimum is the lowest of any coaster at Plopsaland De Panne (tied with 2 others), which makes it a natural first coaster there. Among family-class coasters on Coaster Map the median ride-alone minimum is about 47 in (120 cm), so this rule is about typical for its class. Children from 90 to 120 cm (about 35.4 to 47.2 in) can ride with a companion, so a family can often ride together before a child is old enough to ride alone.

Going by RCDB's map positions, K3 Roller Skater sits on the south-west side of Plopsaland De Panne's coaster line-up. The nearest other coaster is Draconis, roughly 80 m away (120 cm minimum), so the two are easy to ride back to back. Next closest is #LikeMe Coaster at about 120 m. Distances are straight-line estimates from map coordinates, not walking routes.

Written from RCDB statistics and the park's published height rule; it describes the layout, not a review.

K3 Roller Skater layout, trains and ride system

To gain height it uses a lift hill driven by rubber booster wheels. RCDB also lists 1 booster section (Booster Wheel Lift Hill) that add speed mid-course.

RCDB lists one element for K3 Roller Skater:

  1. Booster Wheel Lift Hill

K3 Roller Skater trains and ride system

TrainsSingle train with 8 cars. Riders are arranged 2 across in a single row for a total of 16 riders.
Riders per train16
DesignerPeter Clerx

For families checking heights: it appears on our 48-inch list and every taller list (54 in) as a ride-alone coaster; a child of 36 and 42 in fits its companion band, so they can ride with an adult rather than alone.

Other Vekoma coasters on Coaster Map: Toos-Express (Toverland), Seven Dwarfs Mine Train (Shanghai Disneyland), Royal Scotsman (Hansa-Park) and Dark Ride (E-DA). See all Vekoma coasters.

From the RCDB entry for K3 Roller Skater; elements are RCDB's list, not a ride-by-ride account.

K3 Roller Skater stats

Minimum height120 cm (about 47.2 in)
With a companion90 to 120 cm (about 35.4 to 47.2 in)
Other rider rulesRiders 90 to 120 cm must ride accompanied.
Height42.7 ft
Top speed28.5 mph
Track length1099.1 ft
Inversions0
Ride time1:06
Opened1991
ManufacturerVekoma
ModelJunior Coaster / 335m
TypeSteel, Sit Down, Family

How intense is it?

Mild (family)

RCDB classes it as a family coaster.

Who is it for?

It suits young riders taking their first coasters and adults riding with them and riders who prefer not to go upside down. Riders must be at least 120 cm (about 47.2 in) tall, or 90 to 120 cm (about 35.4 to 47.2 in) with a companion.

Best seat to ride

On a small coaster any seat works. The front row gives the best view.

General guidance from how this style of coaster moves, not a park rule. See best seat on a roller coaster.

How K3 Roller Skater compares

On our intensity ranking K3 Roller Skater is number 4 of 6 at Plopsaland De Panne, where 1 is the most intense. It is the 5th tallest of the park's 6 coasters with a listed height.

If it sounds like too much, the next gentler coaster here is Draconis (45.9 ft tall, 22.4 mph, no inversions; 120 cm minimum). Ready for more? The next step up is Heidi The Ride (72.2 ft tall, 44.3 mph, no inversions; 140 cm minimum).

Site-wide, K3 Roller Skater is taller than 22% and faster than 19% of the 1486 coasters we cover that have a listed figure.

If you liked K3 Roller Skater, try

Similar rides elsewhere on Coaster Map, matched on type, class, builder, size and inversions (the first is the nearest good match within about 700 km, where there is one):

Pins show approximate ride positions from RCDB map coordinates. Map data © OpenStreetMap contributors. A text list of every coaster is below the map.

Before you ride K3 Roller Skater

  • Measure first: the ride-alone minimum is 120 cm (about 47.2 in), and riders from 90 to 120 cm (about 35.4 to 47.2 in) need a companion. Height is checked at the entrance, so ask the ride team before you queue if your child is close.
  • Riders 90 to 120 cm must ride accompanied.
  • Loose items, health warnings and accessibility rules are set by the park and posted at the ride.
  • Opening times and ride status: check the Plopsaland De Panne app or official site on the day.

Planning for a child? The ride height checker shows every coaster they can ride at Plopsaland De Panne.

Keep reading

Frequently asked questions

What is the height requirement for K3 Roller Skater?

Riders must be at least 120 cm (about 47.2 in) tall to ride K3 Roller Skater, or 90 to 120 cm (about 35.4 to 47.2 in) with a companion. Riders 90 to 120 cm must ride accompanied, according to Plopsaland De Panne, official attraction page (checked 10 Nov 2026). Requirements can change, so confirm at the ride entrance.

How tall is K3 Roller Skater?

K3 Roller Skater is 42.7 ft tall, according to RCDB.

How fast does K3 Roller Skater go?

Its top speed is 28.5 mph (46 km/h), according to RCDB.

Does K3 Roller Skater go upside down?

No. It has no inversions.

Is K3 Roller Skater scary?

It depends on the rider, but on intensity: RCDB classes it as a family coaster. It is built for families.

When did K3 Roller Skater open?

K3 Roller Skater opened in 1991 (previously known as Rollerskater).

Who built K3 Roller Skater?

K3 Roller Skater was manufactured by Vekoma.

How long is the ride on K3 Roller Skater?

RCDB lists a ride time of 1 minute 6 seconds over 1099.1 ft of track.

How does K3 Roller Skater get up its first hill?

RCDB lists a lift hill driven by rubber booster wheels; it has no launch.

How many people ride K3 Roller Skater at once?

Each train carries 16 riders, according to RCDB.

Is K3 Roller Skater good for first-time riders?

On the numbers: RCDB classes it as family; it has no inversions; it tops out at 28.5 mph; the minimum height is 120 cm. Those are the marks of a first-coaster ride: a gentle class and no inversions.

Is K3 Roller Skater at Plopsaland De Panne the same as Mine-Expressen at Fårup?

Both are Vekoma Junior Coaster / 335m coasters on RCDB; the Plopsaland De Panne ride opened in 1991 and the Fårup ride in 1992; Plopsaland De Panne sets 120 cm and Fårup sets 105 cm.

More coasters at Plopsaland De Panne

Sorted by ride-alone height, with the lowest height allowed with a companion and any maximum from the official rules.

See the full Plopsaland De Panne coaster guide and map

Related guides

Sources

Last checked 10 Nov 2026. Found an error? Tell us.

New coaster alerts

Get a short email when we add a park or a new coaster opens. No spam; unsubscribe anytime.